Changes between Version 2 and Version 3 of Device/Story/Dumps

Timestamp:

2010-03-14 23:38:26 (6 months ago)

Author:

dottedmag

Comment:

–

Device/Story/Dumps

@@ -274 +274 @@
 crw-------    1 root     root     116,  33 Jan  1  1970 timer
 }}}
+dmesg
+{{{
+Linux version 2.6.28.6 (root@jang) (gcc version 4.3.2 (GCC) ) #706 PREEMPT Tue Dec 15 11:59:43 KST 2009
+CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5387f
+CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
+Machine: SMDK6410
+Memory policy: ECC disabled, Data cache writeback
+On node 0 totalpages: 16384
+free_area_init_node: node 0, pgdat c030c134, node_mem_map c0347000
+  DMA zone: 128 pages used for memmap
+  DMA zone: 0 pages reserved
+  DMA zone: 16256 pages, LIFO batch:3
+  Normal zone: 0 pages used for memmap
+  Movable zone: 0 pages used for memmap
+CPU S3C6410 (id 0x36410101)
+s3c6410_init_clocks: initialising clocks
+S3C24XX Clocks, (c) 2004 Simtec Electronics
+s3c6400_setup_clocks: registering clocks
+s3c6400_setup_clocks: clkdiv0 = 01043310
+s3c6400_setup_clocks: xtal is 12000000
+S3C64XX: PLL settings, A=666000000, M=532000000, E=24000000
+S3C64XX: HCLKx2=266000000, HCLK=133000000, PCLK=66500000
+mout_apll: source is fout_apll (1), rate is 666000000
+mout_epll: source is fout_epll (1), rate is 24000000
+mout_mpll: source is mpll (1), rate is 532000000
+mmc_bus: source is mout_epll (0), rate is 24000000
+mmc_bus: source is mout_epll (0), rate is 24000000
+mmc_bus: source is mout_epll (0), rate is 24000000
+usb-host-bus: source is mout_epll (0), rate is 24000000
+s3c64xx_clk_doutmpll_get_rate: parent is 532000000
+uclk1: source is dout_mpll (1), rate is 66500000
+spi-bus: source is mout_epll (0), rate is 24000000
+spi-bus: source is mout_epll (0), rate is 24000000
+audio-bus0: source is mout_epll (0), rate is 24000000
+audio-bus1: source is mout_epll (0), rate is 24000000
+audio-bus2: source is mout_epll (0), rate is 24000000
+irda-bus: source is mout_epll (0), rate is 24000000
+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
+Kernel command line: root=/dev/ram0 rw ramdisk=5120 initrd=0x50800000,5M console=ttySAC0,115200 init=/linuxrc mem=64M
+s3c64xx_init_irq: initialising interrupts
+PID hash table entries: 256 (order: 8, 1024 bytes)
+timer tcon=00500000, tcnt b98b, tcfg 00000600,00000000, usec 00001719
+Console: colour dummy device 80x30
+console [ttySAC0] enabled
+Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
+Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
+Memory: 64MB = 64MB total
+Memory: 56416KB available (2824K code, 364K data, 124K init)
+SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
+Calibrating delay loop... 663.55 BogoMIPS (lpj=1658880)
+Mount-cache hash table entries: 512
+CPU: Testing write buffer coherency: ok
+net_namespace: 288 bytes
+NET: Registered protocol family 16
+S3C6410 Power Management, (c) 2008 Samsung Electronics
+S3C6410: Initialising architecture
+S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics
+Total 32 DMA channels will be initialized.
+NET: Registered protocol family 2
+IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
+TCP established hash table entries: 2048 (order: 2, 16384 bytes)
+TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
+TCP: Hash tables configured (established 2048 bind 2048)
+TCP reno registered
+checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
+Freeing initrd memory: 5120K
+S3C64XX ADC driver, (c) 2008 Samsung Electronics
+NTFS driver 2.1.29 [Flags: R/O].
+io scheduler noop registered
+io scheduler cfq registered (default)
+elice_hw_board_version_init()
+=========================
+[ebook Board] elice MP 2
+[kernel ver.] 2.6.28
+[dev ver.] 1.0.4.1
+[rel ver.] 0.0.0.0
+=========================
+Elisa Battery Driver Init Success
+[Elisa] Installed iriver Dynamic Clock Change Driver 
+check GPIO, HRDY: 1
+s1d13521ifgpio: set_cmd_mode():
+[s1d13521if_print_disp_timings] disp_timings: vsize=600 vsync=4 vblen=4 velen=10
+[s1d13521if_print_disp_timings] disp_timings: hsize=800 hsync=10 hblen=4 helen=100
+[s1d13521fb_print_wfm_info] wfm: fvsn=1 luts=0 mc=3 trc=10 eb=0xff sb=0xfc wmta=68
+Console: switching to colour frame buffer device 75x50
+fb0: s1d13521 frame buffer device
+Success registering ELISA GPIO device
+s3c6400-uart.0: s3c2410_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C6400/10
+s3c6400-uart.1: s3c2410_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C6400/10
+brd: module loaded
+loop: module loaded
+s3c-udc : S3C HS USB OTG Device Driver, (c) 2008-2009 Samsung Electronics
+s3c-udc : version 15 March 2009 (DMA Mode) 
+mice: PS/2 mouse device common for all mice
+input: s3c-keypad as /class/input/input0
+s3c-keypad Initialized
+S3C Keypad Driver
+elice_powerkey_probe !!!!!!!!!!!
+elice powerkey register success !!!
+S3C24XX RTC, (c) 2004,2006 Simtec Electronics
+s3c_rtc_probe: probe=c02f0480
+s3c2410_rtc: tick irq 34, alarm irq 92
+s3c2410-rtc s3c2410-rtc: rtc disabled, re-enabling
+s3c2410_rtc: RTCCON=01
+s3c: dev (254:0)
+s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
+s3c_rtc_setpie: pie=1
+i2c /dev entries driver
+s3c2440-i2c s3c2440-i2c.0: slave address 0x10
+s3c2440-i2c s3c2440-i2c.0: bus frequency set to 377 KHz
+s3c2440-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
+sdhci: Secure Digital Host Controller Interface driver
+sdhci: Copyright(c) Pierre Ossman
+s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133000000 Hz)
+mmc_send_app_op_cond, 172 ********
+################## Retry !!!!
+###################################
+[[[[[[[[[[ mmc serial= d12197b ]]]]]]]]]
+###################################
+mmc0: new high speed MMC card at address 0001
+mmcblk0: mmc0:0001 M2G1DD 1.91 GiB 
+ mmcblk0: p1 p2 p3
+mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
+s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133000000 Hz)
+$$$$$$$$$$$$$ sd 413c $$$$$$$$$$$$$$$$
+mmc1: new high speed SD card at address b368
+mmcblk1: mmc1:b368 SD02G 1.85 GiB 
+ mmcblk1: p1
+mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
+Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
+ASoC version 0.13.2
+
+
+GPDPUD=0x     2aa : GPDCON=0x   33333
+
+WM8731 Audio Codec 0.13playback: 1, capture : 1
+asoc: WM8731 <-> s3c6410-i2s mapping ok
+Codec Power off ++++++++
+ALSA device list:
+  #0: smdk6410 (WM8731)
+TCP cubic registered
+VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
+s3c2410-rtc s3c2410-rtc: setting system clock to 2009-12-05 23:54:01 UTC (1260057241)
+Loading Ramdisk From mmcblk0p3 
+RAMDISK: cramfs filesystem found at block 0
+RAMDISK: Loading 5004KiB [1 disk] into ram disk... done.
+VFS: Mounted root (cramfs filesystem) readonly.
+Freeing init memory: 124K
+FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
+FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
+}}}