Linux version 2.4.18-rmk7-pxa1 (root@localhost.localdomain) (gcc version 2.95.3 20010315 (release)) #88 五 11月 23 18:42:34 CST 2007
CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0
Machine: Samsung-SMDK2410
Converting old-style param struct to taglist
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: noinitrd root=/dev/mtdblock/2 init=/linuxrc console=ttyS0
Relocating machine vectors to 0xffff0000
Calibrating delay loop... 101.17 BogoMIPS
Memory: 16MB = 16MB total
Memory: 14616KB available (960K code, 469K data, 40K init)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
CPU clock = 202.666666 Mhz, HCLK = 101.333333 Mhz, PCLK = 50.666666 Mhz
S3C2410 USB Controller Core Initialized
USB Function Character Driver Interface - 0.5, (C) 2001, Extenex Corp.
usbctl: Opened for usb-char
usbctl: Started for usb-char
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
ttyS%d0 at I/O 0x50000000 (irq = 52) is a S3C2410
ttyS%d1 at I/O 0x50004000 (irq = 55) is a S3C2410
ttyS%d2 at I/O 0x50008000 (irq = 58) is a S3C2410
pty: 256 Unix98 ptys configured
S3C2410 Real Time Clock Driver v0.1
block: 64 slots per queue, batch=16
loop: loaded (max 8 devices)
init_adc
init_adc:end
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
Kernel UDA1345 setting /n/rprescaler = 2
prescaler = 2
UDA1341 audio driver initialized
physmap flash device: 800000 at 0
request_module[jedec_probe]: Root fs not mounted
 Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Creating 5 MTD partitions on "Physically mapped flash":
0x00030000-0x00130000 : "Kernel (896k)"
0x00130000-0x002a0000 : "root"
0x007e0000-0x00800000 : "BMP"
0x00000000-0x00020000 : "vivi"
0x002a0000-0x007e0000 : "ebr"
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
VFS: Mounted root (cramfs filesystem).
Mounted devfs on /dev
Freeing init memory: 40K
Initializing S3C2410 buffer pool for DMA workaround
usb.c: registered new driver hub


 05_20 add init module for pvi_pm1 

dz: usb-ohci-s3c2410.c 
dz: init_usb_io() 
usb-ohci.c: USB OHCI at membase 0xe9000000, IRQ 26
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
port #1 suspened!
port #0 alived!
hub.c: 1 port detected
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0xbda/0x703) is not claimed by any active driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
  Vendor: Bookeen   Model: Cybook Gen3  -SD  Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
  Vendor: Bookeen   Model: Cybook Gen3  -FD  Rev: 1.00
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1
SCSI device sda: 1983488 512-byte hdwr sectors (1016 MB)
sda: Write Protect is off
Partition check:
 /dev/scsi/host0/bus0/target0/lun0: p1
SCSI device sdb: 128000 512-byte hdwr sectors (66 MB)
sdb: Write Protect is off
 /dev/scsi/host0/bus0/target0/lun1: p1
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
MSDOS FS: IO charset utf8
MSDOS FS: IO charset utf8